 | Stereo
| XLR
| True Differential Balanced
| 100 kOhms Impedance
| +18dBm
| Pin 3 Hot
Outputs
| Stereo
| XLR
| Differential
| Transformerless
| <100 Ohms impedance
| +18dbm
| Pin 3 Hot
Dynamic Range
| >92dB A Weighted
Distortion
| .01% (.007% typical) @ 1kHz (1 dB below clipping in Pitch Change mode, 0 shift, all levels at 0 dB)
Sampling Rate
| 44.1kHz
Sampling Resolution
| 16 bit linear
Frequency Response
| 5Hz to 20 kHz +/- 1 dB, +0.5 dB typical
Delay
| Up to 1.5 seconds (up to full length of sampling memory in Mod Factory mode)
Pitch Variation
| 1 octave up, 2 octave down (3 octaves up & down with Multi-Shift algorithm)
Output Voices
| Two Mono voices, one Stereo Voice
Power Requirements
| 75 Watts
| 110/130 VAC or 200/240 VAC (Switchable on the rear panel)
| 50/60 Hz
Dimensions
| 3.5 x 19 x 13.5 inches (HxWxD)
| 89 x 483 x 343 mm
13 lbs net (20 lbs shipping)
Sampler
| MODEL HS322 - 23.7 seconds Mono (11.8 seconds Stereo)
| MODEL HS395 - 95 seconds Mono (47.5 seconds Stereo)
| Two separate samples can be stored in sample memory
| Manual or audio level record trigger
| Manual, audio level, MIDI note or drum playback trigger
| Sample Start and Stop points adjustable using "rock 'n reel" editing
| Start, Stop and Loop points adjustable with numeric keypad
| Shift sample playback pitch wihout altering length
| Change sample playback without shifting pitch
Return to Harmonizer Page
Return to Eventide Home Page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |