EVENTIDE MODEL DSP4000 SPECIFICATIONS

INPUTS/OUTPUTS

XLR - pin 2 hot, true differential balanced +4 dBm nominal, +20 dBm max (optional) Digital - True 24 bit AES/EBU and S/P DIF, User-Selectable SCMS copy inhibit 1/4" Phone - unbalanced, -10 dBm nominal, +6 dBm max Foot Switch Input - 1/4" phone, two inputs, tip and ring, 10K pullup, shield is ground FootPedal/Control Voltage Input - tip: 0 to 5 volt control voltage input, ring: +5 volt 100 mA supply, shield: ground Relay Output - Dry closure to ground. Shield is ground. Capacity: 200 mA; 11 volts AC or 40 volts DC

Signal to Noise Ratio

> 96 dB. "A" weighted

Distortion

.005% (.003% typical) @ 1 kHz, 1 dB below clipping in THRU program. Gain trim levels at +10 dB, all others 0 dB, XLR inputs and outputs

Total Harmonic Distortion + Noise

87.5 dB @ -40 dB down

Frequency Response

5 Hz to 22 kHz, ±< 1dB

Sample rates

48.000 kHz 44.100 kHz 44.056 kHz 32.000 kHz User supplied crystal (256 times sample rate): contact the factory for installation. Digital audio input, (to 49 kHz)

Power

50 watts 100-130 volts or 200-240 volts, AC (user selectable) 50/60 Hz

Size

Inches: 3.5h x 19w x 12.5d Centimeters: 8.9h x 48.3w x 32d

Weight

12 pounds net, 17 lbs shipping weight 5.5 Kg net, 7.7 Kg shipping weight

PCMCIA Card Compatibility

PCMCIA type I static RAM cards (SRAM), from 128K to 4M, with or without attribute memory. Flash cards are not supported.