Discontinued Products

Information provided for reference only.

WDA (WEATHER DISPLAY ADAPTER) OPTION FOR EVENTIDE'S ARGUS® LINE OF MOVING MAP DISPLAYS

More information about the WDA Option.

Stormscope and Moving Map...with Argus you can have both

With an Eventide Avionics Weather Display Adapter, your Argus Moving Map can display weather information from BF Goodrich FlightSystems' Stormscopes®. A single, high resolution display gives you the benefits of Stormscope plus all the advantages of the Argus Moving Map:
selectable screen ranges that show airports to exact scale
graphic screen with over 11,000 airports, all NAVAIDS, TCAs, ARSAs, Airspace Fixes, etc.
real time situational awareness
text information at your fingertips about every on-screen facility
The Eventide WDA 5005 and 7005 are compatible with WX-10, WX-10A and WX-11 Series Stormscopes. By replacing the Stormscope display with an Argus and interfacing the WDA to the Stormscope processor, the Argus screen can now display information from these units in the Argus' own separate "WD Mode."  The Stormscope display is not superimposed on the moving map screen, but the top and bottom navigation fields are present in both modes. (ADF and/or RMI pointers are only shown in the map modes.)  All Stormscope functions are executed through the Argus function keys, essentially allowing for two instruments in one panel space - great news for pilots with little room to spare.
Argus 5000 and 7000, when receiving input from a heading source, provide a heading-stabilized weather display
full-time navigational data on Argus' weather display
Eventide's WDA 5007-05 and 7007-05 adapters interface with the WX-1000E Weather Mapping System Stormscope (with 429 EFIS option) and emulate Stormscope functions on the Argus display. Weather mapping information can be shown either on both the Argus and the Stormscope displays (for viewing by both the pilot and co-pilot) or solely on the Argus screen, if panel space is a problem.
stabilization capability provided by Stormscope processor for the Argus 3000 (in WD Mode only)
"WX WRN" message while in map mode to alert pilot of impending thunderstorms (available with Argus version 04.XX software only)
full-time navigational data on Argus' weather display

WX500 Stormscope Compatibility

If your Argus has version 5.x software, an upgrade (to version 5.1x) is available optionally to use it as a display for the WX500.  Since the WX500 was originally designed for remote displays, no adapter is necessary, reducing the cost of the installation.  Note that due to FAA regulations and TSO approval, the Argus software update must be performed at the factory.
 
 

WX500 Stormscope "screen dumps" on the Argus CE models

 
WX MODE:
360 degree view 25 mile range		 WX MODE:
120 degree view 25 mile range
Storms on Argus map, ENRoute 30 mile range, CELL mode display Storms on Argus map, ENRoute 30 mile range, STRIKE mode display

 

Return to Argus Page

Return to Eventide Home Page